冷再生技術是一種用于道路養護和改造的環保型施工方法，主要用于修復和升級舊瀝青或水泥混凝土路面。其核心目的是通過回收利用舊路面材料，減少資源浪費和環境污染，同時提升道路性能。以下是冷再生的主要用途和特點：

　　Cold recycling technology is an environmentally friendly construction method used for road maintenance and renovation, mainly for repairing and upgrading old asphalt or cement concrete pavements. Its core purpose is to reduce resource waste and environmental pollution by recycling old road surface materials, while improving road performance. The following are the main uses and characteristics of cold regeneration:

　　1. 舊路面材料的循環利用

　　1. Recycling of old pavement materials

　　冷再生技術通過銑刨、破碎舊路面材料（如瀝青層或水泥混凝土），加入新集料、再生結合料（如泡沫瀝青、乳化瀝青、水泥等）和水，在常溫下重新拌和、攤鋪、壓實，形成新的道路基層或下面層。這一過程實現了舊材料的100%再利用，顯著減少了建筑垃圾和新材料的開采需求。

　　Cold recycling technology forms new road base or lower surface layer by milling, crushing old pavement materials (such as asphalt layer or cement concrete), adding new aggregates, recycled binders (such as foam asphalt, emulsified asphalt, cement, etc.) and water, and re mixing, paving, and compacting at normal temperature. This process achieves 100% reuse of old materials, significantly reducing the demand for construction waste and new material extraction.

　　2. 節能減排與環保優勢

　　2. Energy conservation, emission reduction, and environmental advantages

　　相比傳統熱拌瀝青工藝（需加熱至160-180℃），冷再生無需加熱，可節省60%以上的能源消耗，減少80%以上的二氧化碳排放。同時，避免了瀝青煙等有害氣體的產生，符合綠色施工要求。

　　Compared to the traditional hot mix asphalt process (which requires heating to 160-180 ℃), cold recycling does not require heating and can save over 60% of energy consumption and reduce over 80% of carbon dioxide emissions. At the same time, it avoids the generation of harmful gases such as asphalt smoke, which meets the requirements of green construction.

　　3. 提升道路性能與壽命

　　3. Improve road performance and lifespan

　　冷再生技術能有效消除原路面的深層病害（如裂縫、車轍），并通過優化材料級配和結構設計，增強路面的抗裂性和承載能力。例如，泡沫瀝青再生層的動穩定度可達傳統基層的3倍，部分案例中路面壽命延長至15年。

　　Cold recycling technology can effectively eliminate deep diseases such as cracks and ruts on the original road surface, and enhance the crack resistance and bearing capacity of the road surface by optimizing material grading and structural design. For example, the dynamic stability of foam asphalt regeneration layer can reach three times of the traditional base course, and the pavement life in some cases can be extended to 15 years.

　　4. 經濟出色的應用場景

　　4. Economically efficient application scenarios

　　適用范圍廣：適用于高速公路、國省干線、城市道路及機場跑道的大中修工程。

　　Wide applicability: Suitable for major and medium maintenance projects on highways, national and provincial trunk lines, urban roads, and airport runways.

　　成本節約：可降低施工成本20%-30%，縮短工期1/3至1/2。例如，江西吉康高速項目通過乳化瀝青廠拌冷再生技術，每公里造價降低48%。

　　Cost savings: can reduce construction costs by 20% -30% and shorten the construction period by 1/3 to 1/2. For example, the Jikang Expressway project in Jiangxi Province has reduced the cost per kilometer by 48% through emulsified asphalt plant mixing cold recycling technology.

　　交通影響?。菏┕て陂g可部分開放交通，減少對公眾出行的影響。

　　Low traffic impact: During the construction period, partial traffic can be opened to reduce the impact on public travel.

　　5. 技術分類與工藝選擇

　　5. Technical classification and process selection

　　按施工方式：分為廠拌冷再生（材料運輸至拌和廠處理）和就地冷再生（現場一次性完成銑刨、拌和等工序）。

　　According to the construction method, it is divided into factory mixed cold recycling (material transportation to the mixing plant for processing) and on-site cold recycling (one-time completion of milling, mixing and other processes on site).

　　按結合料類型：包括泡沫瀝青、乳化瀝青和水泥冷再生，不同結合料適用于不同路況和性能需求。

　　According to the type of binder: including foam asphalt, emulsified asphalt and cement cold recycling, different binders are suitable for different road conditions and performance requirements.

　　總結

　　summary

　　冷再生技術通過“變廢為寶”的方式，實現了資源循環、節能減排和道路性能提升的多重目標，是當前公路養護領域向綠色可持續發展轉型的關鍵技術之一。其廣泛應用案例（如江西昌九高速、河北G106國道等）已驗證其成熟性和可靠性。

　　Cold recycling technology achieves multiple goals of resource recycling, energy conservation and emission reduction, and road performance improvement through the "turning waste into treasure" approach, and is one of the key technologies for the transformation of the current highway maintenance field towards green and sustainable development. Its widespread application cases (such as Jiangxi Changjiu Expressway, Hebei G106 National Highway, etc.) have verified its maturity and reliability.